How to Set Up Sirius+Libella for First Building Play
By Giochi Educativi Per Bambini 100% Made in Italy | Published: 2026-11-01
Category: How-to Guides
Set up the Sirius+Libella building set for a toddler's first construction play with a simple, guided routine that builds confidence and keeps pieces together.
Quick answer
Start with a clear, uncluttered surface and one model at a time. Build the first model together, then let your child launch it before moving to the second.
Why this set works for a first building experience
The Sirius+Libella set pairs a hand launch glider with a rubber band powered propeller plane. Both are designed for fast assembly and launching, so the reward comes quickly. That short build-to-play loop suits young children who lose interest during long constructions.
Because the models are launched, not just displayed, the play naturally includes movement and outdoor time. Plan for a space where a glider can land safely.
What to prepare before you open the box
Choose a flat, clear floor or table for assembly and a separate open area for launching. Keep the two models' parts apart so the first build does not become a sorting game. Have a small tray or shallow box for loose pieces.
The set is suggested for children old enough to handle small parts with supervision. If your child still mouths objects, wait or work closely alongside them.
When to move from guided to independent play
Stay hands-on for the first assembly of each model. Once your child can connect the pieces with less help, step back and let them lead. The goal is not perfect flight but repeated, low-pressure attempts.
If a launch fails, resist the urge to rebuild it yourself. Ask your child which part moved and let them try again.
Step-by-step setup for first building play
- Clear a build zone and a launch zone: Set up a flat, empty table or floor area for assembly. Keep a second open space nearby for launching, away from breakables. Common mistake: building on a cluttered surface where small pieces roll away. Check that the launch path is clear before any pieces are connected.
- Open one model at a time: Take out the Hand Launch Glider parts first and leave the propeller plane in the box. Lay the pieces out in the order they connect. Common mistake: emptying both models at once and mixing similar-looking parts. If parts look alike, keep them on separate trays.
- Build the glider together, piece by piece: Connect the pieces slowly, naming each part as you go. Let your child push the final connection into place. Common mistake: assembling the whole model yourself while your child watches. Pause before the last piece and hand it to your child.
- Test the launch indoors first: Launch the glider gently over a soft surface such as a rug or low table. Watch how it flies and adjust the wing if needed. Common mistake: launching hard indoors before your child knows how the glider behaves. A soft landing protects both the model and the mood.
- Introduce the propeller plane as a second build: Once the glider has flown a few times, bring out the rubber band powered propeller plane. Show how the rubber band winds before your child tries. Common mistake: over-winding the rubber band on the first attempt. Wind a few turns, launch, then add more turns gradually.
- Let your child repeat the build: After both models have flown, take them apart together and invite your child to rebuild one without your help. Stay nearby but let them solve connection problems. Common mistake: correcting every misaligned piece immediately. If a part does not fit, ask your child to turn it rather than taking over.
Product facts
- Sirius+Libella: Includes a Hand Launch Glider and a Rubber Band Powered Propeller Plane, both fast and easy to assemble. Two separate models mean you can introduce one at a time, which keeps the first session short and successful.
Sirius+Libella
